Procedures

• Diagnosis system: Read out fault memory
• Change engine oil and oil filter
• Underside of vehicle and engine compartment: Visual inspection for leaks (oils and fluids) and chafing (lines and hoses)
• Underbody Covers: Visual inspection for completeness, fastening and signs of damange
• Coolant Hoses: Check condition
• Radiators and air intakes: Visual inspection for exterior soiling and blockage
• Coolant: Check level and antifreeze
• Particle filter: Replace filter element
• Brake system: Visual inspection of the brake pads and brake discs for signs of wear
• Brake hoses and lines: Visual inspction for damage, correct routing and corrosion
• Drive shafts: Visual inspection of the boots for leaks and signs of damage
• Tires: Check condition and tire pressure
• Door locks, lid locks, safety hook and internal trunk release mechanism (trunk entrapment) of the front lid: Check to ensure that they are adjusted correctly and function properly
• Vehicle lighting system: Check function
• All headlights: Check adjustment
• Horn: Check function
• Winshield wiper/waster system, headlight washer: Check fluid level and nozzle adjustments, make sure to check the antifreeze during the winter months; check wiper blades
• Electrical devises as well as indicator and warning lights: Check function

Test Drive

• Remote control, front seats, foot brake, parking brake (also operating travel), engine, clutch, steering, transmission, ParkAssist, automatic speed control, PSM switch, heater, air-conditioning system and instruments: Check function
• Oils, fluids: Visual inspection for leaks